? 2006 ixys corporation all rights reserved ds99645(11/06) symbol test conditions maximum ratings v dss t j = 25c to 175c 85 v v dgr t j = 25c to 175c; r gs = 1 m ? 85 v v gsm transient 20 v i d25 t c = 25c 230 a i lrms lead current limit, rms 75 a i dm t c = 25c, pulse width limited by t jm 520 a i ar t c = 25c 40 a e as t c = 25c 1.0 j dv/dt i s i dm , di/dt 100 a/ms, v dd v dss 3 v/ns t j 175c, r g = 3.3 ? p d t c = 25c 550 w t j -55 ... +175 c t jm 175 c t stg -55 ... +175 c t l 1.6 mm (0.062 in.) from case for 10 s 300 c t sold plastic body for 10 seconds 260 c m d mounting torque 1.13 / 10 nm/lb.in. weight to-3p 5.5 g to-247 6 g symbol test conditions characteristic values (t j = 25c unless otherwise specified) min. typ. max. bv dss v gs = 0 v, i d = 250 a85v v gs(th) v ds = v gs , i d = 250 a 2.0 4.0 v i gss v gs = 20 v, v ds = 0 v 200 na i dss v ds = v dss 5ma v gs = 0 v t j = 150c 250 ma r ds(on) v gs = 10 v, i d = 50 a, notes 1, 2 3.7 4.4 mw trenchmv tm power mosfet n-channel enhancement mode avalanche rated ixth230n085t IXTQ230N085T v dss =85 v i d25 = 230 a r ds(on) 4.4 m ? ? ? ? ? features ultra-low on resistance unclamped inductive switching (uis) rated low package inductance - easy to drive and to protect 175 c operating temperature advantages easy to mount space savings high power density applications automotive - motor drives - 42v power bus - abs systems dc/dc converters and off-line ups primary switch for 24v and 48v systems high current switching applications to-3p (ixtq) preliminary technical information g d s to-247 (ixth) g s d g = gate d = drain s = source tab = drain (tab) (tab)
ixys reserves the right to change limits, test conditions, and dimensions. ixth230n085t IXTQ230N085T symbol test conditions characteristic values (t j = 25c unless otherwise specified) min. typ. max. g fs v ds = 10 v; i d = 60 a, note 1 75 125 s c iss 9900 pf c oss v gs = 0 v, v ds = 25 v, f = 1 mhz 1230 pf c rss 286 pf t d(on) resistive switching times 32 ns t r v gs = 10 v, v ds = 0.5 v dss , i d = 50 a 49 n s t d(off) r g = 3.3 ? (external) 56 n s t f 39 ns q g(on) 187 nc q gs v gs = 10 v, v ds = 0.5 v dss , i d = 50 a 51 nc q gd 55 nc r thjc 0.27c/w r thch 0.25 c/w source-drain diode symbol test conditions characteristic values t j = 25c unless otherwise specified) min. typ. max. i s v gs = 0 v 230 a i sm pulse width limited by t jm 520 a v sd i f = 50 a, v gs = 0 v, note 1 1.0 v t rr i f = 50 a, -di/dt = 100 a/ms 90 n s v r = 25 v, v gs = 0 v notes: 1. pulse test, t 300 s, duty cycle d 2 %; 2. on through-hole packages, r ds(on) kelvin test contact location must be 5 mm or less from the package body. to-3p (ixtq) outline pins: 1 - gate 2 - drain 3 - source 4, tab - drain to-247ad outline dim. millimeter inches min. max. min. max. a 4.7 5.3 .185 .209 a 1 2.2 2.54 .087 .102 a 2 2.2 2.6 .059 .098 b 1.0 1.4 .040 .055 b 1 1.65 2.13 .065 .084 b 2 2.87 3.12 .113 .123 c .4 .8 .016 .031 d 20.80 21.46 .819 .845 e 15.75 16.26 .610 .640 e 5.20 5.72 0.205 0.225 l 19.81 20.32 .780 .800 l1 4.50 .177 ?p 3.55 3.65 .140 .144 q 5.89 6.40 0.232 0.252 r 4.32 5.49 .170 .216 s 6.15 bsc 242 bsc terminals: 1 - gate 2 - drain 3 - source tab - drain 1 2 3 ixys mosfets and igbts are covered by 4,835,592 4,931,844 5,049,961 5,237,481 6,162,665 6,404,065 b1 6,683,344 6,727,585 7,005,734 b2 one or moreof the following u.s. patents: 4,850,072 5,017,508 5,063,307 5,381,025 6,259,123 b1 6,534,343 6,710,405b2 6,759,692 7,063,975 b2 4,881,106 5,034,796 5,187,117 5,486,715 6,306,728 b1 6,583,505 6,710,463 6771478 b2 7,071,537 preliminary technical information the product presented herein is under development. the technical specifications offered are derived from data gathered during objective characterizations of preliminary engineering lots; but also may yet contain some information supplied during a pre- production design evaluation. ixys reserves the right to change limits, test conditions, and dimensions without notice.
? 2006 ixys corporation all rights reserved ixth230n085t IXTQ230N085T fig. 1. output characteristics @ 25oc 0 20 40 60 80 100 120 140 160 180 200 220 240 0 0.2 0.4 0.6 0.8 1 1.2 v ds - volts i d - amperes v gs = 10v 9v 8v 6v 5v 7v fig. 2. extended output characteristics @ 25oc 0 50 100 150 200 250 300 350 0123456 v ds - volts i d - amperes v gs = 10v 9v 8v 6v 7v 5v fig. 3. output characteristics @ 150oc 0 20 40 60 80 100 120 140 160 180 200 220 240 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 2.2 v ds - volts i d - amperes v gs = 10v 9v 8v 6v 5v 7v fig. 4. r ds(on) normalized to i d = 115a value vs. junction temperature 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 -50 -25 0 25 50 75 100 125 150 175 t j - degrees centigrade r ds(on) - normalized v gs = 10v i d = 230a i d = 115a fig. 5. r ds(on) normalized to i d = 115a value vs. drain current 0.8 1 1.2 1.4 1.6 1.8 2 2.2 2.4 2.6 2.8 0 40 80 120 160 200 240 280 320 i d - amperes r ds(on) - normalized v gs = 10v 15v - - - - t j = 175oc t j = 25oc fig. 6. drain current vs. case temperature 0 10 20 30 40 50 60 70 80 90 -50 -25 0 25 50 75 100 125 150 175 t c - degrees centigrade i d - amperes external lead current limit
ixys reserves the right to change limits, test conditions, and dimensions. ixth230n085t IXTQ230N085T fig. 7. input admittance 0 20 40 60 80 100 120 140 160 180 200 220 240 3.3 3.6 3.9 4.2 4.5 4.8 5.1 5.4 5.7 6 6.3 6.6 v gs - volts i d - amperes t j =150oc 25oc - 40oc fig. 8. transconductance 0 20 40 60 80 100 120 140 160 180 0 20 40 60 80 100 120 140 160 180 200 220 240 i d - amperes g f s - siemens t j = - 40oc 25oc 150oc fig. 9. forward voltage drop of intrinsic diode 0 30 60 90 120 150 180 210 240 270 300 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 v sd - volts i s - amperes t j = 150oc t j = 25oc fig. 10. gate charge 0 1 2 3 4 5 6 7 8 9 10 0 20 40 60 80 100 120 140 160 180 200 q g - nanocoulombs v gs - volts v ds = 43v i d = 25a i g = 10ma fig. 11. capacitance 100 1,000 10,000 100,000 0 5 10 15 20 25 30 35 40 v ds - volts capacitance - picofarad s f = 1 mhz c iss c rss c oss fig. 12. maximum transient thermal impedance 0.01 0.10 1.00 0.0001 0.001 0.01 0.1 1 10 pulse width - seconds z (th)jc - oc / w
? 2006 ixys corporation all rights reserved ixth230n085t IXTQ230N085T fig. 14. resistive turn-on rise time vs. drain current 26 28 30 32 34 36 38 40 42 44 46 48 50 52 24 26 28 30 32 34 36 38 40 42 44 46 48 50 i d - amperes t r - nanoseconds r g = 3.3 ? v gs = 10v v ds = 42.5v t j = 125oc t j = 25oc fig. 15. resistive turn-on switching times vs. gate resistance 0 20 40 60 80 100 120 140 160 180 200 220 2 4 6 8 10 12 14 16 18 20 r g - ohms t r - nanoseconds 30 35 40 45 50 55 60 65 70 75 80 85 t d ( o n ) - nanoseconds t r t d(on) - - - - t j = 125oc, v gs = 10v v ds = 42.5v i d = 50a i d = 25a fig. 16. resistive turn-off switching times vs. junction temperature 34 36 38 40 42 44 46 48 50 25 35 45 55 65 75 85 95 105 115 125 t j - degrees centigrade t f - nanoseconds 50 55 60 65 70 75 80 85 90 t d ( o f f ) - nanoseconds t f t d(off) - - - - r g = 3.3 ? , v gs = 10v v ds = 42.5v i d = 25a i d = 50a fig. 17. resistive turn-off switching times v s. drain current 38 38.5 39 39.5 40 40.5 41 41.5 24 26 28 30 32 34 36 38 40 42 44 46 48 50 i d - amperes t f - nanoseconds 40 50 60 70 80 90 100 110 t d ( o f f ) - nanoseconds t f t d(off) - - - - r g = 3.3 ? , v gs = 10v v ds = 42.5v t j = 125oc t j = 25oc fig. 13. resistive turn-on rise time vs. junction temperature 26 28 30 32 34 36 38 40 42 44 46 48 50 52 25 35 45 55 65 75 85 95 105 115 125 t j - degrees centigrade t r - nanoseconds r g = 3.3 ? v gs = 10v v ds = 42.5v i d = 50a i d = 25a fig. 18. resistive turn-off switching times vs. gate resistance 0 20 40 60 80 100 120 140 160 180 200 220 240 2468101214161820 r g - ohms t f - nanoseconds 50 75 100 125 150 175 200 225 250 275 300 325 350 t d ( o f f ) - nanoseconds t f t d(off) - - - - t j = 125oc, v gs = 10v v ds = 42.5v i d = 50a i d = 25a ixys ref: t_230n085t (6v) 8-18-06.xls
|
